Publications
2009
Ho, S., Lee, Y.-L., Kang, H.T. and Wang, C.J., "Optimization of a Crankshaft Rolling Process for Durability", International Journal of Fatigue, Vol. 31, Issue 5, pp. 799-808, 2009
Le, Q., Kang, H.T., Kridli, G., Khosrovaneh, A.K. and Yan, B., "Effect of Pre-strain Paths on the Mechanical Behavior of Dual Phase Sheet Steel", International Journal of Fatigue, Issue 4, pp. 607-615, 2009
Reyes, G. and Gupta, S., "Manufacturing and Mechanical Properties of Thermoplastic Hybrid Laminates based on DP500 Steel", Composites, Part A, Vol. 40, No. 2, pp. 176-189, 2009
Mane, S.T., Reyes, G. and Mallick, P.K., "Crush Behavior of Thin Composite Plates", Proc. 24th Annual Technical Conference, American Society for Composites, Newark, DE, September, 2009
Sankaran, S. and Mallick, P. K., "Effect of ", Automotive Composites Conference, Troy, MI, September,2009
Mallick, P.K. and Ragone, J.C., "The Effect of Process Parameters on the Quality of Resin Infused Thermoplastic Matrix Prepregs", 17th International Conference on Composite Materials, Edinburgh, Scotland, July, 2009.
Mallick, P.K. and Agarwal, L., "Fatigue of Spot Friction Welded Joints in Mg-Mg, Al-Al and Al-Mg Alloys", SAE Technical Paper 2009-01-0024, 2009 SAE World Congress, Soc. of Automotive Engineers, Detroit, MI, April, 2009
Lazarz, K., McCune, R.C., Wang, W. and Mallick, P.K., "Effect of Surface Pretreatment on Adhesive Bonding and Corrosion Resistance of AM60B, AZ31-H24 and AM30 Magnesium", SAE Technical Paper 2009-01-0037, 2009 SAE World Congress, Soc. of Automotive Engineers, Detroit, MI, April, 2009
Bhise, V.D., Mallick, P.K. and Sarma, V.H., "Determining Perceptual Characterization of Automotive Interior Materials", SAE Technical Paper 2009-01-0017, 2009 SAE World Congress, Soc. of Automotive Engineers, Detroit, MI, April, 2009
Shi, Z., Mallick, P.K. and McCune, R.C., "Study of Cathodic Metal Transfer to Magnesium Surfaces in Aqueous Environments and Engine Coolant Formulations by Surface Analytic Methods",TMS
2008
Mallick, P.K., "Fiber Reinforced Composites: Materials, Manufacturing and Design", 3rd Edition, CRC Press, Boca Raton, FL, 2008.
Zhou, Y., Pervin, F., Jeelani, S. and Mallick, P.K., "Improvement in Mechanical Properties of Carbon Fabric-Epoxy Composite using Carbon Nanofibers", J. Materials Processing Technology, Vol. 198, p. 445-453, 2008
Arul, S.G., Miller, S.F., Kruger, Pan, T.-Y., Mallick, P.K. and Shih, A.J.,"Experimental Study of Joint Performance in Spot Friction Welding of 6111-T4 Aluminum Alloy", Science and Technology of Welding and Joining, Vol. 13, No. 7, p. 629-637, 2008
Kang, H. and Ostrom, T., "Mechanical Behavior of Cast and Forged Magnesium Alloys and Their Microstructures", Materials Engineering and Science: A, Vol. 490, pp. 52-56, 2008.
Kang, H.T., Lee, Y.-L., Sun, X.J., "Effects of Residual Stress and Heat Treatment on Fatigue Strength of Weldments", Materials Science and Engineering: A, Vol. 497, Issue 1-2, pp. 37-43, 2008
Shi, Z., Mallick, P.K. and McCune, R.C., "Characterization of Film Formation on Magnesium Alloys due to Corrosion in Engine Coolants", SAE Paper No. 2008-01-1155, 2008 World Congress, Society of Automotive Engineers, Detroit, MI, April, 2008.
Agarwal, L., Mallick, P.K. and Kang, H.T., "Spot Friction Welding of Mg-Mg, Al-Al and Mg-Al Alloys", SAE Paper No. 2008-01-0144, 2008 World Congress, Society of Automotive Engineers, Detroit , MI, April, 2008.
Mohan Iyenger, R. Amaya, M., Bonnen, J., Citrin, K., Kang, H.T., Laxman, S., Khosrovaneh, A.K. and Schillaci, N., "Influence of Geometric Parameters and their Variabilityon Fatigue Resistance of Spot-Weld Joints", SAE Paper No. 2008-01-0698, 2008 World Congress, Society of Automotive Engineers, Detroit, MI, April, 2008.
Kang, H. , Mohan Iyengar, R. and Bonnen, J., "Variability of Fatigue Strength of Spot Welded Specimens for Advanced and Traditional High Strength Steels," Materials Science and Technology 2007, Detroit, MI, September, 2007.
Reyes-Villanueva, G. and Kang, H., "Non-Contact Full Field Strain Analysis of Engineering Materials: Lightweight Multifunctional Aluminum Foam Sandwich Structures and Spot-Welded High Strength Steels", Proceedings of 2008 NSF Engineering Research and Innovation Conference, Knoxville, TN, January, 2008.
Giefer, B. and Mallick, P.K., "Effect of Processing Parameters on the Strength of Resin Infused Polyamide-6 Impregnated Glass Fabric Composite", 23rd Annual Tech. Conference, American Soc. for Composites, Memphis, TN, September, 2008.
Ragone, C. and Mallick, P.K., "Development of a Thermoplastic Prepreg Manufacturing Process by Continuous Resin Infusion", SAMPE Fall Conference, Memphis, TN, September, 2008.
2007
Raman, H., Luckey, S.G., Kridli, G.T., and Friedman, P.A., "Development of Accurate Constitutive Models for Simulation of Superplastic Forming," Journal of Materials Engineering and Performance,Vol.16, No.3, pp.284-292, 2007.
Dandekar, C., Orady, E. and Mallick, P. K., "Drilling Characteristics of an E-glass Fabric Reinforced Polypropylene and an Aluminum Alloy: A Comparative Study", Journal of Manufacturing Science and Engineering, ASME Trans., Vol. 129, No.6, December, p. 1080-1087, 2007
Kang, H.T., Bonnen, J., Amaya, M., Iyengar, R., Yan, B., Link, T., Agrawal, H., Walp, M., Khosravaneh, A. and Shih, M., "Fatigue of Advanced High Strength Steel Spot Welds," SAE Transaction, pp. 726-744, 2007.
Park, J.M. and Kang, H.T., "Prediction of Fatigue Life for Spot Welds using Back-Propagation Neural Networks", Materials and Design, Vol. 28, No. 10, pp. 2577-2584, 2007
Yoon, D., Shen, J., Ohou, E. and Orady, E., "Simulating Multi-Axis Machining Using NURBS and Quaternions" , Journal of Computer-Aided Design & Applications, Vol.4, No. 1-4, pp 49-56, 2007
Kang, H.T., "Fatigue Prediction of Spot Welded Joints Using Equivalent Structural Stress," Materials and Design, Vol. 28, pp.873-843, 2007
Kang, H.T. and Reyes-Villanueva, G., "Mechanical Behavior of Lightweight Thermoplastic Fiber-Metal Laminates," Journal of Materials Processing Technology, Vol. 86.pp. 284-290, 2007
Kang, H.T., Dong, P. and Hong, J., "Fatigue Analysis of Spot Welds Using the Mesh-Insensitive Structural Stress Methods," International Journal of Fatigue, Vol. 29, 1546-1533, 2007.
Kang, H.T. and Reyes-Villanueva, G., "Fatigue Test and Prediction of Lightweight Thermoplastic Fiber-Metal Laminates," Journal of Testing and Evaluation, Vol.35, No. 3, pp.266-271, 2007
Kang, H., Lee, Y., Chen, J., and Fan, D., "A Thermo-Mechanical Fatigue Damage Model for Variable Temperature and Loading Amplitude Conditions," International Journal of Fatigue, Vol. 29, pp. 1797-1802, 2007
Deshmukh, U., Kang, H. and Shah, K., "Design of Dual Sliding Door Mechanism for a Small Sized Car," SAE World Congress 2007, Paper 2007-01-0461, Detroit, MI, April, 2007.
Shah, K., Kang, H. and Deshmukh, U., "Design of Dual Sliding Door for a Small Size Car and Its Validation Using CAE Tools," SAE World Congress 2007, Paper 2007-01-0995, Detroit, MI, April, 2007.
Le, Q., Kang, H., Khosrovaneh, A., Sa, C.Y., and Yan,B., "Pre-strain Effect on Fatigue of DP600 Sheet Steel," SAE World Congress 2007, Paper 2007-01-0995, Detroit, MI, April, 2007.
Balakrishnan, K., Kang, H. and Mallick, P.K., "Joining Aluminum with Nylon Using Frictional Heat," SAE World Congress 2007, Paper 2007-01-1701, Detroit, MI, April, 2007.
Arul, S.G., Pan, T., Schwartz, W.J., Shih, A.J., Mallick, P.K., and Miller, S.F., "Effects of Surface Treatment (Lubrication) on Spot Friction Welded Joints Made of 6111-T4 Aluminum Sheets," SAE World Congress 2007, Detroit, MI, April, 2007.
Reyes-Villanueva, G., Farha, E., Lotfi, N., Al-Mutar, A. and Rasheed A., "Mechanical Response of Composite Reinforced Aluminum Foam Sandwich Structures for Automotive Structures" 2007 SAE World Congress, Paper No. 2007-01-1722, Detroit, MI, April 2007
Reyes-Villanueva, G., and Gupta S., "Fracture Properties of Thermoplastic Hybrid Laminates based on Automotive Grade Steel," Proceedings of the SAMPE 2007 Symposium and Exhibition, Baltimore, MD, 2007
2006
Jin, Z. and Mallick, P.K., "Effect of Cold Work on Tensile and Fatigue Performance of Aluminum Alloy 5754," Journal of Materials Engineering and Performance, Vol. 15, pp. 540-548, 2006.
Reyes-Villanueva, G., and Gupta, S., "Interfacial Fracture Properties of Environmentally Friendly Hybrid Systems," Journal of Materials Science, Vol. 41, No. 18, pp.6142-6145, 2006.
Dandekar, C., Orady, E. and Mallick, P.K., "Drilling Characteristics of an E-glass Fabric Reinforced Polypropylene Composite," Proc. of the 21st Annual Technical Conference of the American Society for Composites, September 18-21, 2006.
Pervin, F., Zhou, Y., Jeelani, S. and Mallick, P.K., "Improvement in Mechanical Properties of Carbon Nanofiber Filled Carbon-Epoxy Composites," 21st Annual Tech. Confer., American Soc. For Composites, Dearborn, MI, September, 2006.
Reyes-Villanueva, G. and Gupta S., "Interfacial Fracture Properties of Thermoplastic Composite-Metal Hybrid Laminates Based on Automotive Grade Steels", Proc. of the 21st Annual Technical Conference of the American Society for Composites, Dearborn, MI, 2006
El-Hage, H., Mallick, P.K. and Zamani, N., “A Numerical Study on the Quasi-Static Axial Crush Characteristics of Square Aluminum-Composite Hybrid Tubes”, Composite Structures, Vol. 73, Issue 4, p. 505-514, 2006.
John J. Bonnen, Hong Tae Kang, Mark Anthony Amaya, Raj Mohan Iyengar, Benda Yan, Todd M. Link, Hari N. Agrawal, Matthew Scott Walp, Abolhassan K. Khosravaneh, and Michael Shih, “Fatigue of Advanced High Strength Steel Spot Welds”, SAE Congress 2006, 2006-01-0978.
Kang H. and Reyes-Villanueva G., “Fatigue Response of Lightweight Thermoplastic Fiber-Metal Laminates”, Proceedings of the 9th International Fatigue Congress, Atlanta, GA, USA, 2006.
Pan, T-Y, Santella, M., Mallick, P.K., Frederick, A. and Schwartz, W.J., “A Feasibility Study on Spot Friction Welding of Magnesium Alloy AZ31”, Proc. 63rd Annual World Magnesium Conference, Beijing, China, May 21-24, 2006.
Reyes Villanueva, G., “Failure mechanisms in FML reinforced aluminum foam sandwich structures”, Proceedings of the SAMPE 2006 Symposium and Exhibition, Long Beach, CA, USA, 2006.
Reyes-Villanueva G., Gupta S., “Interfacial Fracture in Environmentally Friendly Thermoplastic Composite-Metal Laminates,” Proceedings of the 2006 SAE World Congress, Detroit, MI, USA, 2006 01-0117.
Reyes-Villanueva G., Kang H., Singh R., Gupta S., “Formability Analysis of Thermoplastic Lightweight Fiber-Metal Laminates,” Proceedings of the 2006 SAE World Congress, Detroit, MI, USA, 2006 01-0118.
Sivaraj, D., McCune, R., Mallick, P.K. and Mohanty, P., “Aqueous Corrosion of Experimental Creep-Resistant Magnesium Alloys”, 2006 SAE World Congress, SAE Paper No. 2006-01-0257, April 2006.
Venkateswaran, V, Kridli, G.T., Luckey, S.G., Xia, Z.C., and Friedman, P.A., “Accuracy and Efficiency Issues related to Element size and Pressure control in Superplastic Forming Simulation.” Transactions of the North American Manufacturing Research Institute (NAMRI/SME), Vol. 34, 2006.
Zhou, Y. and Mallick, P. K., “Tensile and Fatigue Performance of an Injection Molded Short E-glass Fiber Reinforced Polyamide 6,6. I: Effects of Orientation, Hole and Weld Line”, Polymer Composites, Vol. 27, No. 2, p.230-237, 2006.
Zhou, Y. and Mallick, P. K., “Effect of Melt Temperature and Hold Pressure on the Weld Line Strength of an Injection Molded Talc-Filled Polypropylene”, Proc. The Advanced Materials and Processing Technologies (AMPT) Conference, Las Vegas, July 30-Aug 3, 2006.
2005
Babbage, J. M. and Mallick, P. K., “Static Axial Crush Performance of Unfilled and Foam-Filled Aluminum- Composite Hybrid Tubes”, Composite Structures, Vol. 70, No. 2, p. 177-184, 2005.
El-Hage, H., Mallick, P.K. and Zamani, N., “A Numerical Study on the Quasi-Static Axial Crush Characteristics of Square Aluminum Tubes with Chamfering and Other Triggering Mechanisms”, International Journal of Crashworthiness, Vol. 10, No. 2, p. 183-195, 2005.
Jandali, G. and Mallick, P.K., “Vibration Welding of a Continuous Glass Fiber Reinforced Polypropylene”, Composites, Part A, Vol. 36, p. 1687-1693, 2005.
Kang, H., “Fatigue Prediction of Spot Welded Joints Using Equivalent Structural Stress,” Materials and Design, 2005, Accepted.
Lee, C.W., 2005, “A New Dynamic State SpaceModel for the Cylindrical Grinding Process,” Proceedings of the 2005 ASME IMECE, DSC-Vol. 74, pp. 697-703.
Ramanathan, A. and Mallick, P. K., “Consolidation and Microstructure Variation in Compression Molded Commingled E-glass Fiber/PET Laminates”, Proc. 20th Annual Tech. Conference of the American Society for Composites, September 7-9, 2005.
Raut, A., Kridli, G.T. and Mallick, P. K., “Fatigue of Friction-Stir Welded Joints in Aluminum Tailor Welded Balnks”, 2005 SAE World Congress, SAE Paper No. 2005-01-1253, March 2005.
Raut, A., Kridli, G.T., and Mallick, P.K., “Fatigue of Friction-Stir Welded Joints in Aluminum Tailor Welded Blanks”, SAE Technical Paper No. 2005-01-1253, 2005.
Reyes Villanueva, G, “Formability Analysis of Thermoplastic Fibre-Metal Laminates”, Proceedings of the 20th Annual Technical Conference of the American Society for Composites, Philadelphia, PA, USA, 2005.
Zhou, Y. and Mallick, P. K., “A Non-Linear Damage Model for the Tensile Behavior of an Injection Molded Short E-glass Fiber Reinforced Polyamide-6,6”, Materials Science and Engineering, Vol. A393, p. 303-309, 2005.
Zhou, Y. and Mallick, P. K., “Effect of Melt Temperature and Hold Pressure on the Tensile and Fatigue Properties of an Injection Molded Talc-Filled Polypropylene”, Polymer Engineering and Science, Vol. 45, p. 755-763, 2005.
Zhou, Y. and Mallick, P. K., “Fatigue Performance of an Injection Molded Talc-Filled Polypropylene”, Polymer Engineering and Science, Vol. 45, p. 510-516, 2005.
Zhou, Y., Rangari, V., Mahfuz, H., Jeelani, S. and Mallick P.K., “Thermal and Mechanical Behavior of Polypropylene, Talc-Filled Polypropylene and Polypropylene Nanocomposites”, Proc. SAMPE 2005, Soc. for the Advancement of Material and Process Engineering, Long Beach, CA, May 2005.
Mallick, P. K. and Zhou, Y., “Tensile and Creep Behavior of a Layered Blow-Molded Fuel Tank Material”, 2nd International Confer. on Polymers in Automotive Fuel Containment, Hanover, Germany, December 6-7, 2005.
2004
Bhagwan, A.V., Kridli, G.T., and Friedman, P.A., “Formability Improvement in Aluminum Tailor Welded Blanks via Material Combinations”, Journal of Manufacturing Processes, Vol. 6, No. 2, pp. 134-140, 2004.
El-Hage, H., Mallick, P.K. and Zamani, N., “Effect of Triggering Mechanism on the Load-Displacement Response and Folding Pattern of Square Aluminum Tubes”, 8th International LS-DYNA Users Conference, Dearborn, MI, May 2004.
El-Hage, H., Mallick, P.K. and Zamani, N., “Numerical Modeling of Quasi-Static Axial Crush of Square Aluminum-Composite Hybrid Tubes”, International Journal of Crashworthiness, Vol. 9, No. 6, p. 653-664, 2004.
Fernandes, A.O., Boeman, R.G., Mallick, P.K. and Norris, R.E, Jr., “Investigation of the Budd Slurry Process for the Production of Random Fiber Preforms”, Proc. SAMPE 2004, Soc. for the Advancement of Material and Process Engineering, Long Beach, CA, May 2004.
Jandali, G. and Mallick, P. K., “Vibration Welding of Continuous Fiber Thermoplastic Matrix Composites”, J. of Thermoplastic Composite Materials, Vol.17, No. 4, p. 343-358, 2004.
Mallick, P. K. and Zhou, Y.,“Effect of Mean Stress on the Stress-Controlled Fatigue of a Short E-Glass Fiber Reinforced Polyamide-6,6”, International Journal of Fatigue, Vol. 26, p. 941-946, 2004.
Rajagopalan B., Mohanty P.S., Mallick, P.K., McCune R.C. and Ricketts M. S., “Corrosion Performance Evaluation of Magnesium Alloys by Electrochemical Polarization Technique”, Proc. 33rd Annual Meeting of TMS, March 14, 2004.
Tebbe, P.A., and Kridli, G.T., “A Review of Previous Research on the Warm Forming of Aluminum Alloys”, International Journal of Materials & Product Technology, Vol. 21, No. 1, pp. 24-40, 2004.
Wang, Y. and Mallick, P. K., “Dynamic Denting Study of Aluminum Alloys”, 2004 SAE World Congress, SAE Paper No. 2004-01-0183, March 8-11, 2004.
Zhou, Y. and Mallick, P. K., “Fatigue Strength Characterization of E-glass Fibers using Fiber Bundle Test ”, J. of Composite Materials, Vol. 38/22, p. 2025-2036, 2004.
Zhou, Y., Wang, Y. and Mallick, P. K., “An Experimental Study on the Tensile Behavior of Kevlar Fiber Reinforced Aluminum Laminatesat High Strain Rates”, Materials Science and Engineering, Vol. A381, p. 355-362, 2004.
Zhou, Y., Wang, Y., Mallick, P. K. and Xia, Y., “Strain Softening Constitutive Equation for Tungsten Heavy Alloy under Tensile Impact”, Materials Letters, Vol. 58, p. 2725-2729, 2004.
2003
Fu, M. and Mallick, P.K., “Fatigue of Self-Piercing Riveted Joints in Aluminum Alloy 6111”, International Journal of Fatigue, Vol. 25, p. 183-189, 2003.
G. T. Kridli, and E. A. Orady, “ Development of Process Maps for Tube Hydroforming Process,” The International Journal of Science and Technology, Vol. 14, Summer 2003, pp. 23-27.
Kanawade, D. and Mallick, P. K., “Thermoplastics Matrix Composites for Structural Automotive Applications”, Proc. 14th International Conference on Composite Materials (ICCM-14), San Diego, CA, July 14-18, 2003.
Kanawade, D. and Mallick, P.K., “Process Development for Thermoplastic Matrix Composite Beams”, Proc. 18th Annual Conference, American Society of Composites, October 2003.
Kridli, G.T., Bao, L., Mallick, P.K. and Tian, Y., “Investigation of Thickness Variation and Corner Filling in Tube Hydroforming”, J. of Materials Processing Technology, Vol. 133, p. 287-296, 2003.
Kridli, G.T., Bao, L., Mallick, P.K., and Tian, Y., “Investigation of Thickness Variation and Corner Filling in Tube Hydroforming”, Journal of Materials Processing Technology, Vol. 133, No. 3, pp. 297-306, 2003.
Mallick, P. K and Zhou, Y., “Static and Fatigue Behavior of Polypropylene and Polyamide-6 Nanocomposites”, J. of Materials Science, Vol. 38 (15), p. 3183-3190, 2003.
Mallick, P. K., “Status of Composite Materials Education in the United States – The Results of a Survey”, Proc. 18th Annual Conference, American Society of Composites, October 2003.
Qin, Z. and Mallick, P. K., “A Study on the Bending Springback of Aluminum Alloy 5754”, 2003 SAE World Congress, The Society of Automotive Engineers, SAE Paper No. 2003-01-0576, 2003.
Zhou, Y., Yang, W., Xia, Y. and Mallick, P. K., “An Experimental Study on the Tensile Behavior of a Carbon Fiber Reinforced Aluminum Composite at Different Strain Rates”, Materials Science and Engineering, A362, p.112-117, 2003.
2002
Babbage, J. and Mallick, P. K., “Axial Crush Resistance of Aluminum Composite Hybrid Tubes”, Proc. 17th Annual Conference of The American Society for Composites, October 2002.
Bhagwan, A.V., Kridli, G.T., and Friedman, P.A., “Influence of Weld Characteristics on Numerically Predicted Deformation Behavior of Aluminum Tailor Welded Blanks”, Proceedings of SAE 2002 World Congress, SAE Technical Paper Number 2002-01-0386 SP-1683, 2002.
Jandali, G., Kanawade, D. and Mallick, P. K., “Development of Thermoplastic Matrix Composite Tubes for Automotive Applications”, Proc. 17th Annual Conference of The American Society for Composites, October 2002.
Jin, Z. and Mallick, P. K., “Enhancement of Fatigue Life of Self-Piercing Riveted Joints by Coining”, Symposium of Automotive Body Joining and Assembly, Paper No. IMECE2002-32337, The American Society of Mechanical Engineers, November 2002.
Kanawade, D., Jandali, G., Kridli, G.T. and Mallick, P.K., “Cost-Benefit Analysis of Thermoplastic Matrix Composites for Structural Automotive Applications”, SAE Future Car Congress 2002, Society of Automotive Engineers, SAE Paper No. 02 FCC-64, 2002.
Kanawade, D., Jandali, G., Kridli, G., and Mallick, P.K., “Cost-Benefit Analysis of Thermoplastic Matrix Composites in Structural Automotive Applications”, SAE Technical Paper Number FCC 2002-01-1891, 2002.
Kuhn, R.M. and Mallick, P.K., “Effect of Weld Pitch Variation on the Performance of a Two-Piece Spot-Welded Body Structure”, 2002 SAE World Congress, Society of Automotive Engineers, SAE Paper No. 2002-01-0152, 2002.
Tian, Y., Mallick, P.K. and Kridli, G.T., “Effects of Processing Parameters on Thickness Variation in Pressure Sequence Hydroforming”, 2002 SAE World Congress, Society of Automotive Engineers, SAE Paper No. 2002-01-0793, 2002.
Tian, Y., Mallick, P.K., and Kridli, G.T., “Effects of Processing Parameters on Thickness Variation in Pressure Sequence Hydroforming”, Proceedings of SAE 2002 World Congress, SAE Technical Paper Number 2002-01-0793 SP-1686, 2002.
Wang, Z., Zhou, Y. and Mallick, P.K., “Effects of Temperature and Strain Rate on the Tensile Behavior of Short Glass Fiber Reinforced Polyamide-6”, Polymer Composites, Vol. 23, No. 5, p. 858-871, 2002.
Zhou, Yuanxin and Mallick, P.K., “Effects of Temperature and Strain Rate on the Tensile Behavior of Unfilled and Talc-Filled Polypropylene, Part I: Experiments”, Polymer Engineering and Science, Vol. 42, No. 12, p. 2449-2460, 2002.
Zhou, Yuanxin and Mallick, P.K., “Effects of Temperature and Strain Rate on the Tensile Behavior of Unfilled and Talc-Filled Polypropylene, Part II: Constitutive Modeling”, Polymer Engineering and Science, Vol. 42, No. 12, p. 2461-2470, 2002.
2001
Fu, Maofeng and Mallick, P.K., “Effect of Process Variables on the Static and Fatigue Properties of Self-Piercing Riveted Joints in Aluminum Alloy 5747”, 2001 SAE World Congress, Society of Automotive Engineers, SAE Paper No. 2001-01-0825, 2001.
Fu, Maofeng and Mallick, P.K., “Fatigue of Hybrid (Adhesive/Bolted) Joints in SRIM Composites”, International J. of Adhesion and Adhesives, Vol. 21, p. 145-159, 2001.
Raffo, Federico and Mallick, P.K., “Development of Composite and Steel/Composite Tubes for Stiffness Critical Applications”, Proc. 16th Annual Technical Conference of the American Society for Composites, 2001.
2000
Friedman, P.A., and Kridli, G.T., “Microstructural and Mechanical Investigation of Aluminum Tailor Welded Blanks”, Journal of Materials Engineering and Performance, Vol. 9, No. 5, pp. 541-551, 2000.
Fu, Maofeng and Mallick, P.K., “Performance of Adhesive Joints in an Automotive Composite Structure”, Paper No. 2000-01-1131, Journal of Materials and Manufacturing, SAE Transactions, 2000.
Kridli, G., Bao, L. and Mallick, P.K., “Two Dimensional Plane Strain Modeling of Tube Hydroforming”, Symposium on Advances in Metal Forming, 2000 International Mechanical Engineering Congress and Exposition, ASME, November, 2000.
Kridli, G.T., Bao, L., Mallick, P.K., “Two Dimensional Plane Strain Modeling of Tube Hydroforming”, Proceedings of the ASME Manufacturing Engineering Division, MED-Vol. 11, pp. 629-634, 2000.
Kridli, G.T., Friedman, P.A., and Sherman, A.M., “Formability of Aluminum Tailor-Welded Blanks”, Proceedings of SAE 2000 World Congress, SAE Technical Paper Number 2000-01-0772, SP-1536, 2000.
Mallick, P.K. and Daly, P., “Investigation of Thermoforming as a Method of Manufacturing Plastic Air Intake Manifolds”, Paper No. 2000-01-0045, Journal of Materials and Manufacturing, SAE Transactions, 2000.
Mallick, P.K., “Graduate Education and Research in Lightweight Automotive Materials and Processing”, Proc. 2000 ASEE Annual Conference, American Soc. for Engineering Education, St. Louis, June, 2000.
Ragalyi, A. and Mallick, P.K., “Crashworthiness of Aluminum-Composite Hybrid Crush Tubes Containing Filament Wound Over-Wraps”, Proc. Midwest Advanced Materials and Processing Confer., Soc. for the Advancement of Materials and Processing, September, 2000.
Sadasivam, B., Cherng, J. and Mallick, P.K., “Dynamic Response of Impact Damaged Random Fiber Automotive Composites”, Journal of Reinforced Plastics and Composites, Vol. 19, No. 2, p. 124-136, 2000.
1999
Atodaria, D.R., Putatunda, S.K. and Mallick, P.K., “Delamination Growth Behavior of a Fabric Reinforced Laminated Composite under Mode I Fatigue”, J. of Engineering Materials and Technology, ASME Trans., Vol. 121, No. 3, p. 381-385, 1999.
Atodaria, D.R., Putatunda, S.K. and Mallick, P.K., “Fatigue Crack Growth Model and Mechanism of a Random Fiber SMC Composite”, Polymer Composites, Vol. 20, No. 2, 1999.
Lang, T.P. and Mallick, P.K., “The Effect of Recessing on the Stresses in Adhesively Bonded Single Lap Joints”, International J. of Adhesion and Adhesives, Vol. 19, p. 257-271, 1999.
Mallick, P.K., “A Simple Experiment for Determining Elastic Properties of Polymers”, Proc. 13th National Educators’ Workshop, Detroit, November, 1999.
Mallick, P.K., “Graduate Education in Manufacturing Engineering for the Automotive Industry of the Future”, 1999 International Automotive Manufacturing Conference, Soc. of Automotive Engineers, Detroit, May, 1999.
Sadasivam, B. and Mallick, P.K., “Low Energy Impact Damage Resistance of Automotive Composites”, 14th Technical Conference, American Soc. for Composites, Dayton, September, 1999.
Satish Kumar, K., Xia, Z. and Mallick, P.K., “Analysis of Adhesively Bonded Single Lap Joints in SRIM Composites under Flexural Loading”, Proc. 12th International Conference on Composite Materials, ICCM-12, Paris, July, 1999.
Shaffer, T.M. and Mallick, P.K., “Press Formability Study with a Thermoplastic Matrix Composites”, Proc. SAMPE-ACCE-DOE Advanced Materials Conference, Soc. for the Advancement of Materials and Processing, Detroit, September, 1999.
Xia, Z. and Mallick, P.K., “Press Forming of Filled and Fiber Reinforced Nylon”, Proc. 57th Annual Tech. Confer., Soc. of Plastics Engineers, New York, May, 1999.
1998
Lang, T.P. and Mallick, P.K., “Effect of Spew Geometry on Stresses in Single Lap Adhesive Joints”, International J. of Adhesion and Adhesives, Vol. 18, p. 167-177, 1998.
Mazumdar, S.K. and Mallick, P.K., “Static and Fatigue Behavior of SMC-SMC Adhesively Bonded Joints”, Polymer Composites, Vol. 19, No. 2, p. 139-146, 1998.
Patel, S.A. and Mallick, P.K., “Development of a Methodology for Defect Reduction in Injection Molding using Process Simulations. Part I: Effects of Inlet Melt Temperature and Coolant Temperature”, J. of Injection Molding Technology, Vol. 2, No. 4, p. 176-183, 1998.
Patel, S.A. and Mallick, P.K., “Development of a Methodology for Defect Reduction in Injection Molding using Process Simulations. Part II: A Multi-Factor Design of Experiments Approach”, J. of Injection Molding Technology, Vol. 2, No. 4, p. 184-191, 1998.
Saathoff, D.G. and Mallick, P.K., “Static and Fatigue Strength Evaluation of Clinched Joints in an Aluminum Alloy”, 1998 SAE Congress, Soc. of Automotive Engineers, SAE Paper No. 980693, Detroit, February, 1998.
Satish Kumar, K. and Mallick, P.K., “Bolted and Hybrid Joints in SRIM Composites”, Proc. 13th Annual ESD Advanced Composites Confer., Detroit, September, 1998.